360 Systems MAXX-6T - Manual (Page 30)

____________________________________________________________________________________
Page 30 MAXX 6T Owner’s Manual
Figure 7 - Timing Configuration Screen
Setting the Video Input Source
The MAXX 6T can accept a video signal at either its composite video input (CVBS), or its serial
digital (SDI) input. Verify that the input to be used is currently active. For a discussion of the SDI –
Embedded Audio option, refer to Configuring Embedded Audio on Page 67.
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window.
The Dialog of Figure 8 appears. Select the appropriate Video Input source by clicking the related
radio button in the Video Input Source section of the dialog. Click APPLY or OK.
Figure 8 - Channel Configure Dialog