360 Systems MAXX-6T - Manual (Page 84)

____________________________________________________________________________________
Page 84 MAXX 6T Owner’s Manual
USING IMAGE SERVER WITH FINAL CUT PRO
The Image Server IMX option coupled with Telestream’s Flip4Mac Image Server Component
provides a “round-trip” compatibility with Apple Final Cut PRO, providing the following capability:
• Record Industry Standard IMX Content.
• Export IMX clips to Final Cut PRO over Gigabit Ethernet using the Flip4Mac Image Server
Component Plug-in developed especially for Image Server.
• Edit IMX clips in Final Cut PRO.
• Export IMX clips back to Image Server for Playback.
Requirements
The following equipment is required to support Final Cut PRO interoperation:
1. Image Server MAXX with IMX Hardware Option 300-102-0024-01
2. Image Server software version 4.05.370 or later
3. Final Cut PRO software version 5.0.4 or later
4. Telestream Image Server Flip4MAC plug-in version 2.1.10.12
5. Apple Macintosh computer “MAC PRO” including:
a. Dual Core Xeon 2.66Ghz with
b. 1GB DDR2 RAM minimum.
c. NVIDIA GeForce 7300 GT graphics with 256MB memory
d. 250GB Serial ATA 3 GB/s 7200-rpm hard drive