360 Systems TCR Multi-Track - Manual (Page 103)

TCR Series User's Guide Machine Setup 5-19
Chase When
MENU | Machine Setup | Sync and Time Code | Chase When
The Chase When function allows you to select the control panel button function(s) that enable the
Chase Mode itself.
Use the following steps to select the Chase Mode enable button(s):
1. On the Setup Sync and Time Code Menu, select item 6 (CHASE WHEN). The current
setting is highlighted.
2. Select the desired Chase Mode button(s):
• CHASE PRESSED: the Chase Mode is enabled when the CHASE button is
pressed.
• CHASE+PLAY PRESSED: the Chase Mode is enabled only when the CHASE
and PLAY buttons are pressed simultaneously.
Chase Until
MENU | Machine Setup | Sync and Time Code | Chase Until
The Chase Until function allows you to select the system mode (or button) that is used to cancel the
Chase Mode.
Use the following steps to select the Chase Mode cancel function:
1. On the Setup Sync and Time Code Menu, select item 7 (CHASE UNTIL). The current
setting is highlighted.
2. Select the desired “chase until” function:
• CHASE CANCELLED: the Chase Mode is canceled only when the CHASE
button is turned off or STOP is pressed.
•
LOCK, THEN FREE RUN: the Chase Mode is canceled once the system locks to
the selected time code source. Thereafter, the system is in free run.
•
TC LOSS OR ERROR: the Chase Mode is canceled if there is a loss of time code
or a system error.
Generator
MENU | Machine Setup | Sync and Time Code | Generator
The Generator function allows you to set the mode for the TCR’s internal time code generator. Use
the following steps to set the generator mode:
1. On the Setup Sync and Time Code Menu, select item 8 (GENERATOR). The current
setting is highlighted.
2. Select the desired generator mode:
•
STOPPED: the TCR’s internal time code generator is stopped.
•
FREE RUN: the TCR’s internal time code generator is in free run mode.