360 Systems TCR Multi-Track - Manual (Page 67)

TCR Series UserManual Operations 4-17
Storing and Recalling Offsets
When the OFST Register is displayed in the Transport Screen the STORE and RECALL buttons
will save and recall up to 10 offset values to/from the audio file.
Naming Offsets
[Transport Screen] | MENU | Name Offsets
From the Transport Screen, press MENU and select item 2, NAME OFFSETS, to display the
offsets for the current file. Use the Jog Wheel to highlight the offset to be named, then press
ENTER. The Name Offset prompt will be displayed, and a new offset name may be entered using
the keypad.
NAME OFFSET
ENTER NEW NAME
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
ENTER = DONE
EXIT = CANCEL
EDIT IN = DELETE
EDIT OUT = INSERT
UNDO = UNDO CHANGES
Name Offset Prompt
Track Slip
Individual tracks may be “slipped” (offset in time) forward or backwards with the track slip feature,
even when the transport is playing. This may be used to compensate for delays in external processing
inserted in the audio path, or for special effects.
From the Transport Screen, press SLIP. A prompt will request that one or more tracks be selected.
Use the numeric keypad to select the desired tracks. A small check mark will appear beside the
selected tracks. Press ENTER.
A prompt to select a track slip function will appear. Use the numeric keypad to make a selection:
0 = Set Slip Value: Enter a slip value from -9 to +9 seconds using the numeric keypad or the
knob, then press ENTER.
1 = Change Slip by Relative Amount: Enter the amount of change for the current slip values,
then press ENTER.
2 = Enable Slip: Activates the current slip value for the selected tracks.
3 = Disable Slip: Disables the current slip value for the selected tracks. This has the same effect
as setting the slip value to zero.