360 Systems TCR Multi-Track - Manual (Page 28)

2-12 Overview TCR Series User's Manual
Shuttle
Press SHUTTLE to change the function of the Jog Wheel from a jog control to a shuttle
control. In this mode, rotate the Jog Wheel to shuttle the transport forward and backward at
a speed proportional to the direction and position which the wheel is turned (up to 60x play).
ALT
The ALT button is provided for future enhancements.
Adjust
Many keys in the Jog Section change from transport controls to adjustment controls: On the
Transport Screen, press ADJUST to display the Adjust Menu.
•
<< (Rewind) changes to ADJ-, which allows you to “nudge” a value down by one
increment.
• >> (Fast-forward) changes to ADJ+, which allows you to “nudge” a value up by
one increment.
•
EDIT IN changes to , which allows you to move the Time Code Register’s
underline to the left.
• EDIT OUT changes to , which allows you to move the Time Code Register’s
underline to the right.
The Jog Wheel changes to allow you to “dial in” values.
<< / Adjust -
•
Press << to rewind the transport at a fixed speed, ranging up to -60x play.
•
Press << twice to locate immediately to the next stop point earlier in time.
•
In “adjustment” mode, press ADJ- to “nudge” a value down by one increment.
>> / Adjust +
•
Press >> to fast-forward the transport at a fixed speed, ranging up to +60x play.
•
Press >> twice to locate immediately to the next stop point later in time.
•
In “adjustment” mode, press ADJ+ to “nudge” a value up by one increment.
Edit In /
The EDIT IN button is used in combination with other buttons to perform special functions,
such as storing and recalling a time value related to an Edit-In location.
•
For example, press RECALL, EDIT IN to recall a stored Edit-In point.
•
Press STORE, EDIT IN to store the current Time Code Register value.
•
In “adjustment” mode, the symbol will move the Time Code Register’s
underline to the left.