Drives – 360 Systems TCR Multi-Track User Manual
Page 110
5-26 Error! No text of specified style in document.
TCR Series User's Guide
Drives
MENU | Machine Setup | Drives
The Setup Drives Menu allows you to selectively enable or disable each system drive. This function
in turn sets which drives are checked whenever drives are scanned. Only “enabled” drives are
scanned, and only those actually present are listed on the Drive List.
To reach the Setup Drives Menu, select item 4 (DRIVES) on the Setup Menu.
SETUP DRIVES
0. >
DRIVE 0
:
ENABLED
1.
DRIVE 1
:
ENABLED
2.
DRIVE 2
:
ENABLED
3.
DRIVE 3
:
DISABLED
4.
DRIVE 4
:
DISABLED
5.
DRIVE 5
:
DISABLED
6.
DRIVE 6
:
DISABLED
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Setup Drives Menu
Use the following steps to enable or disable a drive:
1. On the Setup Drives Menu, select the number of the drive that you wish to setup (0 through
6). The drive’s current status is highlighted.
2. Toggle the selected drive between ENABLED and DISABLED.