360 Systems TCR Multi-Track - Manual (Page 36)

2-20 Overview TCR Series User's Manual
Introduction to the Drive List
The Drive List allows you to select drives and perform a variety of drive-related functions. The
display presents a list of the internal and external drives, numbered 0 through 7, attached to the TCR.
DRIVES:
0. (ZIP DRIVE 0) 0.0M FREE
1. (HARD DRIVE 1) 8.6G FREE
2. (REMOVABLE DRIVE 2) 9.1G FREE
'ENTER' OR NUMBER SELECTS DRIVE
'EXIT' CHECKS FOR AVAILABLE DRIVES
'MENU' SHOWS DRIVE MENU
Drive List
•
The first two columns list each drive’s logical number and name.
•
The right column can display the drive’s free space, the total number of files, the total run
time or the total size.
About the Drive Menu
The Drive Menu presents operations you can perform for the selected drive. The title bar at the top
shows which drive is selected. The most commonly used Drive Menu operations are naming it,
copying its contents to another drive, and on completion of a project, erasing its contents.
DRIVE MENU: (ZIP DRIVE 0)
0. MACHINE SETUP
1. > RENAME DRIVE
2. ERASE DRIVE
3. COPY DRIVE
4. SPIN UP DRIVE
5. SPIN DOWN DRIVE
6. INSTALL FILE SYSTEM
7. CHECK DISK
8. FORMAT DRIVE
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Drive Menu