360 Systems TCR Multi-Track - Manual (Page 29)

TCR Series User's Manual Overview 2-13
Edit Out /
The EDIT OUT button is used in combination with other buttons to perform certain special
functions, such as storing and recalling a time value related to an Edit-Out location.
•
For example, press RECALL, EDIT OUT to recall a stored Edit-Out point.
•
Press STORE, EDIT OUT to store the current Time Code Register value.
•
In “adjustment” mode, the symbol will move the Time Code Register’s
underline to the right.
Headphones
The HEADPHONE button is used in combination with the Jog Wheel to select the desired
volume. A Headphone Menu is appears, superimposed over the current display.
Power Switch
Use the POWER switch to turn power on or off.
Note The TCR can be powered off at any time from any screen. When
power is restored, the system returns to the same non-menu screen
that was active at power- down. If TCR is recording during a power
loss, all but the last few seconds of audio will be saved. If power is
lost during an edit operation, the edit will not be saved.