Select the desired copy options as follows, Choose the source directory (item 1 , source dir), Choose the destination drive (item 3 , dest drive) – 360 Systems TCR Multi-Track User Manual

Page 125

Advertising
background image

6-12 System Management

TCR Series User's Manual

Use the following steps to copy a directory:

1. To copy a subset of all files, ensure that the desired files are “marked.” To mark a file, access

the File List, highlight each file and press MARK. A check mark appears ( ü ).

2. On the Directory List, press MENU.

3. On the Directory menu, select COPY DIRECTORY (item 3). The Copy Directory menu

appears.

COPY DIRECTORY

0.

COPY NOW

1. >

SOURCE DIR

: 2 (DIRECTORY 1.2)

2.

DEST DIR

: 4 (DIRECTORY 1.4)

3.

DEST DRIVE

: 1 (HARD DRIVE 1)

4.

FILES TO COPY

: ALL FILES

5.

IF FILE EXISTS

: RENAME COPY OF FILE

6.

ERROR OPTION

: LOG AND CONTINUE

7.

LOG OPTION

: CLEAR LOG FIRST

8.

VIEW LOG

'ENTER' OR NUMBER SELECTS MENU ITEM

PRESS 'EXIT' TO EXIT MENU

Copy Directory Menu

4. Select the desired copy options as follows:

•

Choose the Source Directory (item 1, SOURCE DIR).

•

Choose the Destination Directory (item 2, DEST DIR). If you want to change
drives, use item 3, DEST DRIVE.

•

Choose the Destination Drive (item 3, DEST DRIVE).

•

Choose the Files that you wish to copy (item 4, FILES TO COPY). Choose
between ALL FILES and MARKED FILES.

•

Choose the desired action if a File exists in the selected destination directory (item 5,
IF FILE EXISTS). Choose between:

SKIP FILE: the file will be skipped if it exists in the destination directory.

RENAME COPY OF FILE: the file that is copied will renamed, for
example, 007 (COPY) NIGHT BLUES.

RENAME EXISTING FILE: the file that already exists in the destination
directory will be renamed, for example, 000 (OLD) NIGHT BLUES.

REPLACE IT: the existing file will be overwritten.

•

Choose the desired Error Option (item 6, ERROR OPTION). Choose between:

LOG AND CONTINUE: errors will logged but the procedure will continue.

STOP ON ERROR: the procedure will halt if an error occurs.

•

Choose the desired Log Option (item 7, LOG OPTION). Choose between CLEAR
LOG FIRST and DON'T CLEAR LOG.

•

If you want to view the contents of the current log, select VIEW LOG (item 8).

5. Once all options are set, select COPY NOW (item 0).

Advertising