Analogue Solutions Oberkorn sequencer - Manual (Page 12)

Oberkorn User Manual
12 EXPLANATION OF EACH CONTROL | Analogue Solutions
A-GLIDE Control
This is a portamento control (glide/slew). It will smooth out the changes in voltage as each
step is played. Just try it and see! If you appear to get no CV change at the output, you may
have too much glide set.
VOLTAGE OUT A
The CV for channel A comes out of this socket.
TRANSPOSE IN A Socket
The transpose input socket allows you to take a CV from an external device (say an LFO
module, CV keyboard, EG), and mix it with the internal CV generated with the CV controls.
For example;
Put an LFO wave in there and you will add vibrato to the pitch (or wah-wah to filter, tremolo
to VCA).