Analogue Solutions Oberkorn sequencer - Manual (Page 14)

Oberkorn User Manual
14 MIDI To Trigger Converter (NONE-EURORACK VERSION) | Analogue Solutions
GATE OUT X Socket
The gate signal for channel X is output at this socket
GATE OUT Y Socket
The gate signal for channel Y is output at this socket
MIDI TO TRIGGER CONVERTER (NONE-EURORACK VERSION)
Oberkorn has a completely independent MIDI to Trigger converter (MIDI-Trig). It is NOT a
MIDI to CV converter.
It is used to enable you to sync Oberkorn to MIDI.
It has three sections. Binary control, Triggers, Clock, which will be explained later.
The MIDI-Trig section is in the box labeled ‘midi’ on the front panel.
On the rear panel are a MIDI In and MIDI Thru sockets.