Cannon Instrument CAV-2000 - Manual (Page 15)

9
CANNON ® Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO ® Instruction & Operation Manual
Version 2g — May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
Checking Instrument Settings
1. Use your mouse to click (select) Configure from the VISCPRO ®
menu bar.
2. Select your instrument from the list of available instruments (there
may be only one instrument in the list).
3. Select Instrument Settings from the list of configuration options.
The Instrument Settings window will appear.
You will use the Instrument Settings window (see below) to describe
and control CAV instrument operational features. These settings affect
the instrument as a whole. Check the instrument settings for your instru-
ment per the instructions below, and make any necessary changes:
The Instrument Settings window
Click the radio button corresponding to the number of sample positions
for your sample trays.
Use the ID field to input instrument identification information using up to
16 alphanumeric characters.
The S/N: field (non-editable) indicates the four-digit serial number from
the label on the CAV rear service panel.