Cannon Instrument CAV-2000 - Manual (Page 68)

CANNON ® Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO ® Instruction & Operation Manual
Version 2g — May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
62
Pasting Sample IDs To paste Sample ID entry information into another tray/sample location,
highlight the desired line(s) in the Sample List Box and right-click your
mouse to access the Sample Action window. Then select Paste Into
Selected Samples from the menu options. OR you can use the C-V
key combination.
Copying/pasting multiple IDs
You may copy or paste a block of (multiple) sample ID entries using the
same procedure described above. When pasting multiple entries, make
certain to select the same number of sample locations as were initially
copied. If you select a larger number, only the original copied number of
entries will be pasted. If you select a smaller number, information for the
last sample(s) in the block will not be copied.
Inserting/deleting a sample ID in the test sequence
To insert a sample ID into an existing sample run test sequence, highlight
the desired sample location in the sample run sequence and press I.
OR highlight the desired ID number, click the right mouse button, and
select Insert At from the Sample Action options.
The existing sample entries will be moved down one position in the
sequence and you can enter the new sample ID information at the cursor.
CAUTION If the list box already contains a sample ID for every position on the tray,
the sample data for the final position will be discarded when a position is
cleared for new data.
To delete one or more sample IDs and move all remaining samples in the
sequence up in position, highlight the sample ID(s) you wish to delete
and press the D key. OR you may right-click in the highlighted block
and select Delete from the sample action options window. The high-
lighted sample (or samples) will be deleted and any existing sample
entries following the removed items will be moved up to take their place
in the sample run sequence.
CAV analysis modules
The VISCPRO ® software is shipped with several analysis modules which
can be used to create reports based on sample test data. For general
instructions on using analyses, see Chapter 6, Analysis Configuration
Options. For information on a specific analysis module included with
your CAV package, see the chapter on the particular analysis.
Configuring the VI Matcher
VI Matching with VISCPRO ® The VI Matcher is a VISCPRO ® software feature that functions in
tandem with the VI analyses to enable Viscosity Index (VI) calculation
from sample data residing in the VISCPRO
® database.