Cub Cadet 3000 Series - Manual (Page 4)

ADDITIONAL ATTACHMENTS:
ATTACHMENT MODEL NUMBER_________________
ATTACHMENT SERIAL NUMBER_________________
ATTACHMENT MODEL NUMBER_________________
ATTACHMENT SERIAL NUMBER_________________
ATTACHMENT MODEL NUMBER_________________
ATTACHMENT SERIAL NUMBER_________________
ATTACHMENT MODEL NUMBER_________________
ATTACHMENT SERIAL NUMBER_________________
P.T.O. CLUTCH BURNISHING PROCEDURE:
Start unit.
Place throttle lever in the 1/2 throttle position.
Cycle P.T.O. clutch 10 times. (10 seconds on / 10 seconds off).
Place throttle lever in the full throttle position.
Cycle P.T.O. clutch 10 times. (10 seconds on / 10 seconds off).
Customer Signature____________________________________________________________Date______________
Service Technician Signature_____________________________________________________Date_____________
NOTES:
Final Inspection:
Check fuel system for leaks. Tank, lines, fittings etc.
Check for missing or loose fasteners & decals.
Clean / polish. Check overall appearance.
Place manuals in a appropriate location (Under Seat)
at conclusion.