Cub Cadet 3000 Series - Manual (Page 46)

6 - 12
Cub Cadet 3000
Prior to the installation of the end cap, freely lubricate
the gerotor star seal ring.
Lubricate and install the o-ring seal into the groove
located in the gerotors outer ring.
Lubricate and install both the o-ring seal and seal ring
into the gerotor star. Install the o-ring in the groove
located in the star first and then the seal ring.
Figure 47.
Figure 46.
Figure 45.
Figure 48.
Install the end cap onto the gerotor assembly by
aligning the cap screw holes.