Cub Cadet 7532 - Manual (Page 164)

8 Steering
122
5) After tightening the nut for tie rod end with torque at 44.1 to 53.9N•m {450 to 550kgf•cm, 32.5 to
39.8lbf•ft}, adjust the gap in the tightening range of 9.8N•m {100kgf•cm, 7.23lbf•ft} and assemble the split
cotter pin.
8.4.2 Free Play for Steering Wheel
(Unit: mm {in})
There is a possibility of oil leakage or air suction, etc of
hydraulic cylinder if exceeding the above standard.
Check for the malfunction and perform inspection and
maintenance in case of nonexistence of malfunction.
Item Referential Value
Free Play for Steering
Wheel Circumference: 20 to 50
{0.79 to 1.97}
Hydraulic cylinder
Rod end Tie rod end
Hose R
Locknut
Tie rod end
Rod end
Nut
Tie rod end
Tie rod end
Nut
Locknut
Locknut
Hose L
GZ3W27-008
Steering wheel
GS7W3-197