Cub Cadet 7532 User Manual
Page 36
9
List of Refueling, Lubrication, and Water/Oil Supply
30
9
List of Refueling, Lubrication, and Water/Oil
Supply
• Engine oil ........................... Multi STOU oil or better than diesel engine oil API classified, class CD,
SAE 10W - 30.
• Fuel .................................... Diesel gas oil
A.P.I. specific gravity (min.) ..................................... 34
Inflammation point (min.) .................................... 60 ºC
Clouding point (Wax appearing point) (max.)..... -20.6 ºC
Pour point (max.) ............................................... -26 ºC
Distillation temperature, at point 90% ..... from 282 to 338 ºC
Viscosity : at 38 ºC
Centistokes...................................... from 2.0 to 4.3
Saybolt second universal .................. from 32 to 40
Cetane number (min.) ..... 43 (high lat. in winter: from 45 to 55)
Capacitance ratio of water and sediment (max.)....... 0.05%
Weight ratio of sulfur (max.) .............................. 0.50%
Corrosion of copper strip (max.) ...........................No.2
Weight ratio of ash residue (max.)..................... 0.01%
• Gear Oil.............................. Genuine oil or API classified GL - class 4, SAE, 80W
No.
Item
Kind
Classification
Capacity (L)
Replacing Period
API Service
SAE
Viscosity No.
1
Engine Crank Case
Engine oil
Over class
CD
10W-30
4.2
{1.1}
Inspect pre-operation
and change every 100
hrs. (Change after 50 hrs
at 1
st
inspection.)
2
Fuel Tank
Gas oil
-
-
27
{7.1}
Inspect pre-operation.
(Supply accordingly.)
3
Radiator
Cooling water (incl.
antifreeze solution 40
to 45%)
-
-
5.5
{1.5}
Inspect pre-operation.
(Supply accordingly.)
4
Transmission Case
Gear oil
(Multi STOU oil)
GL-4
80W
(10W-30)
GEAR : 29L{7.7gal}
HST : 32L{8.5gal}
Change after
100hrs 1
st
time and
every 200 hrs after.
5
Front Axle Case
Gear oil
(Multi STOU oil)
GL-4
80W
(10W-30)
4.0
{1.1}
Change after
100hrs 1
st
time and
every 200 hrs after.
6
Brake Link (Left/Right)
Grease
-
-
Properly
Lubricate before operation
and every 50 hrs.
7
Rod End 4 Points
Grease
-
-
Properly
Lubricate before operation
and every 50 hrs.
8
Front Axle Fulcrum Shaft
Grease
-
-
Properly
Lubricate before operation
and every 50 hrs.
9
Differential Locking Device
Pedal Fulcrum Shaft
Grease
-
-
Properly
Lubricate before operation
and every 50 hrs.