Aps status window—detailed description, Aps circuits area, Initiating a telnet service – Cisco 12000/10700 V3.1.1 User Manual

Page 148

Advertising
background image

4-34

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 4 Managing Chassis

Initiating a Telnet Service

APS Status Window—Detailed Description

The APS Status window displays a single APS Circuits area.

APS Circuits Area

The APS Circuits area displays a table with the following headings:

Group—Group number of the APS circuit or interface.

Working Slot/Port—Slot/port number of the working interface. For a circuit, if the working interface is
part of another chassis, “remote” is displayed instead of the slot/port number.

Protect Slot/Port—Slot/port number of the protected interface. For a circuit, if the protected interface is
part of another chassis, “remote” is displayed instead of the slot/port number.

Initiating a Telnet Service

The Initiate Telnet Service application allows you to log onto the device, in order to configure or retrieve
information from the device.

To launch a telnet window, proceed as follows:

Step 1

Right click on the chassis object and select the Technology Specific Tools>Initiate Telnet Service
option. See

Table 4-1 on page 4-2

for information on which objects allow you to launch the telnet

window. The telnet window appears:

Figure 4-17 Telnet Window

Step 2

Enter the required password (the device may also require a valid user name).

Advertising