Cisco 12000/10700 V3.1.1 - Manual (Page 531)

16-29
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
Route Info—A reference to MIB definitions specific to the particular routing protocol which is
responsible for this route, as determined by the value specified in the route's RouteProto value.
Next Hop AS—The Autonomous System Number of the Next Hop. The semantics of this object are
determined by the routing-protocol specified in the route’s RouteProto value. When this object is
unknown or not relevant its value should be set to zero.
Metric1—The primary routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route’s RouteProto value. If this metric is not used, its value should be
Notused.
Metric2—An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route’s RouteProto value. If this metric is not used, its value should be
Notused.
Metric3—An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route’s RouteProto value. If this metric is not used, its value should be
Notused.
Metric4—An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route’s RouteProto value. If this metric is not used, its value should be
Notused.
Metric5—An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route’s RouteProto value. If this metric is not used, its value should be
Notused.
Storage Type—Displays the storage type for this entry.
Route Targets Tab
The Route Targets tab (see Figure 16-21 ) displays the route table information for VRFs in a single
Routes area.