Cisco 12000/10700 V3.1.1 - Manual (Page 381)

13-15
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 13 Managing VLANs
VLAN Configuration
Figure 13-19 VLAN Configuration Window
Step 2 Choose a Domain and VLAN from the list boxes displayed at the left of the window.
.
Commissioning a VLAN
Note You can select multiple VLANs (from the VLAN object selector list) which allows you to commission
all of the selected VLANs simultaneously. You can choose multiple VLANs in a list by holding down
the Shift key and then selecting the first and last VLAN in the list. You can choose multiple individual
VLANs by holding down the Ctrl key and clicking on the individual VLANs. Multiple selection of
domains is possible in the VLAN configuration window.
To commission a VLAN, proceed as follows:
Step 1 Open the VLAN Configuration window. See “Viewing the VLAN Configuration Window” section on
page 13-14 for further details.
Step 2 Choose a Domain and VLAN from the list boxes displayed at the left of the window.
Step 3 Choose Commission to commission the selected VLAN. An Action Report window appears confirming
that the commissioning action was completed successfully.