Cisco 12000/10700 V3.1.1 - Manual (Page 397)

14-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Configuration
Modifying BGP on a Chassis
The BGP Modify Window allows the user to modify the BGP Configurations on the device. To modify
a BGP process, proceed as follows:
Step 1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the BGP Configuration
Window” section on page 14-3 for further details.
Step 2 Choose a chassis from the left side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you to launch the BGP
Modify window for the selected chassis.
Step 3 Click on the Modify button. The BGP Modify window appears.
Note The Modify button is active only when there is BGP running on the device.
Figure 14-3 BGP Modify Window