Cisco 12000/10700 V3.1.1 User Manual
Page 500
15-44
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 15 MPLS Management
Fault Management for MPLS Traffic Engineering
LSP Resource Tab
The LSP Resource tab (see
) displays the resource information specific to LSPs. The LSP
Resource tab displays the Select Tunnel and Resource Table areas.
Note
To view LSP Resource information, choose an LSP in the Select Tunnel area and a Resource Index in
the Resource Table area. Information is displayed for the selected Resource index for the selected LSP.
Figure 15-24 MPLS Tunnel Information Window—LSP Resource Tab
Select Tunnel
The Select Tunnel area displays the following information:
Tunnel Id—Displays the tunnel identification number.
Instance—Displays the tunnel instance of the LSP. It is useful to identify multiple instances of tunnels
for the purposes of backup and parallel tunnels.
Ingress LSR—Displays the source IP address of the LSP.
Egress LSR—Displays the egress LSR IP address.
Resource Index—This variable represents a pointer to the traffic parameter specification for this tunnel.