Cisco 12000/10700 V3.1.1 - Manual (Page 539)

17-5
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 17 MPLS Trap Management
MPLS CLI Troubleshooting Services
Traffic Engineering (TE) Traps—Allows you to choose whether to Enable/Disable Traffic Engineering
based traps. The TE traps supported by the Cisco 12000/10720 Router Manager application are
described in
Table 17-1 on page 17-1 .
LDP Traps—Allows you to choose whether to Enable/Disable LDP based traps. The LDP traps
supported by the Cisco 12000/10720 Router Manager application are described in
Table 17-1 on
page 17-1 .
MPLS CLI Troubleshooting Services
This section describes the MPLS CLI troubleshooting services that can be accessed using the
Cisco 12000/10720 Router Manager application.
Launching the MPLS CLI Troubleshooting Services Windows
Table 17-3 displays the Cisco 12000/10720 Router Manager MPLS CLI Troubleshooting windows that
can be launched from each object type. For example, the Verify Routing Protocols window can be
launched from a chassis object, but cannot be launched from any other object types.
Table 17-3 Launching the MPLS CLI Troubleshooting Services Windows
Cisco 12000/10720
Router Manager
Window/Task Objects (that can be selected) to Open the Window
Menu Options to Select to Open
Window
Site
Chassis
12000
Series Chassis
10720 Module Interface Soft-
ware
Folder VRF
Folder VRF
Verify Routing
Protocols No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify
Routing Protocols
Verify Routing
Tables No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify
Routing Tables
Verify CEF
Switching No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify CEF
Switching
Verify CEF
Switching
Summary No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify CEF
Switching Summary
Verify MPLS
Interfaces No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify MPLS
Interfaces
Verify Label
Distribution No Yes Yes No No No No No Fault> MPLS> CLI
TroubleShooting> Verify Label
Distribution