Figure 15-20 – Cisco 12000/10700 V3.1.1 User Manual

Page 492

Advertising
background image

15-36

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 15 MPLS Management

Fault Management for MPLS Traffic Engineering

Figure 15-20 MPLS Tunnel Information Window—Head Tunnel Setup Tab

Note

To view head tunnel setup information, select the head tunnel in the Select Tunnel area.

Select Tunnel

The Select Tunnel area displays the following information:

Tunnel Id—Displays the tunnel identification number.

Instance—Displays the tunnel instance of the LSP. It is useful to identify multiple instances of tunnels
for the purposes of backup and parallel tunnels.

Ingress LSR—Displays the source IP address of the LSP.

Egress LSR—Displays the egress LSR IP address.

Tunnel Info

Tunnel Name—Displays the name assigned to the tunnel. This name can be used to refer to the tunnel
on the LSRs console port.

Tunnel Descr—Displays a textual string containing information about the tunnel. If there is no
description this object contains a zero length string.

Tunnel Type—Displays either head tunnel or LSP.

Signalling Protocol—Displays the signaling protocol, if any, which was used to setup this tunnel.
Possible values are none, rsvp, crldp, or other.

Advertising