Cisco 12000/10700 V3.1.1 - Manual (Page 237)

9-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
ATM Interface Status
ATM Receive Status
The ATM Receive Status area is not applicable to Cisco 12000/10720 Router Manager.
Physical Layer Status
The Physical Layer Status area contains the following fields:
Physical Interface Status—Not applicable to Cisco 12000/10720 Router Manager.
Clock Source Status—Not applicable to Cisco 12000/10720 Router Manager.
Physical Port Type—Type of physical layer medium on this interface.
ATM Port Status
The ATM Port Status area contains the following fields:
Number of VPCs—Not applicable to Cisco 12000/10720 Router Manager.
Admin Address—Not applicable to Cisco 12000/10720 Router Manager.
Number of VCCs—Number of PVCs and SVCs at this interface.
ATM Address Type—Not applicable to Cisco 12000/10720 Router Manager.
Number of PVCs—Not applicable to Cisco 12000/10720 Router Manager.
NSAP (Network Service Access Point) Address—NSAP address of the interface.
Number of PVPs—Not applicable to Cisco 12000/10720 Router Manager.
Configured VP Interface—Not applicable to Cisco 12000/10720 Router Manager.
Number of PCs—Not applicable to Cisco 12000/10720 Router Manager.
SVC Minimum VCI—Not applicable to Cisco 12000/10720 Router Manager.
Number of SCs—Not applicable to Cisco 12000/10720 Router Manager.
Active SVPs—Not applicable to Cisco 12000/10720 Router Manager.
Total Connections—Not applicable to Cisco 12000/10720 Router Manager.
Active SVCs—Not applicable to Cisco 12000/10720 Router Manager.
Action
The Action area displays a single Show Connections button. When you choose the Show Connections
button an Action report window appears displaying IOS information regarding the status of the
connections on the selected interface.