Cisco 12000/10700 V3.1.1 - Manual (Page 383)

13-17
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 13 Managing VLANs
VLAN Configuration
Figure 13-21 Action Report Window
Step 4 Choose Close to close the Action Report window.
Start Performance Logging
Note You can select multiple VLANs (from the VLAN object selector list) which allows you to start
performance logging on all the selected VLANs simultaneously. You can choose multiple VLANs in a
list by holding down the Shift key and then selecting the first and last VLAN in the list. You can choose
multiple individual VLANs by holding down the Ctrl key and clicking on the individual VLANs.
To start performance logging, proceed as follows:
Step 1 Open the VLAN Configuration window. See “Viewing the VLAN Configuration Window” section on
page 13-14 for further details.
Step 2 Choose a Domain and VLAN from the list boxes displayed at the left of the window.
Step 3 Choose Start to start performance polling on the VLAN. An Action Report window appears confirming
that the state of the VLAN object was successfully changed.
Note There is no performance data gathered on the VLANs but all the sub-interfaces (in the Normal
state) under the VLAN move to the performance logging state and the performance data is
gathered for the sub-interfaces.