faytech 26" Vandal Non-Touch Monitor - Manual (Page 7)

COMPONENTS
01. PWR: turn the display on or off
02. MENU: open the OSD menu –or-
confirm selection in the OSD menu
03. CH+: increase volume –or- navigate
in the OSD menu or change the
high-lighted values in the menu
04. CH-: decrease volume –or- navigate
in the OSD menu –or- change the
highlighted values in the menu
05. INPUT: witches the input signal
sequentially from VGA to DVI to HDMI
to AV1 to AV2. Make sure the input
source is correct or you will not see any
image on your screen.
06. Infrared receiver for remote
control
01.
02.
03.
04.
05.
06.