Freerider FR510DXs2b(D,Land Ranger S) - Manual (Page 9)

2. With the aid of a 17mm spanner (not supplied) loosen
the 10mm seat clamp fixing bolt (see Fig 5).
3. Remove the 10mm fixing bolt and reposition the bolt
into one of the four preferred location holes of the seat
mounting tube (see Fig 6).
4. Re-tighten the 10mm fixing bolt. Refit the seat onto
your Scooter.
Do not have the seat set too high, you must be
able to place both feet firmly on the Scooter's floor area.
Stability will be reduced the higher your seat is set on the
mounting tube. Always take great care when cornering,
lean into the corner to achieve the best stability from your
Scooter.
5. Seat Slide of the seat: (see Fig 7) Located on the right
front side of the seat. The lever allows you to adjust your
seat forwards and backwards when sitting on the seat.
Simply pull up the lever and move in the desired position
backward by pushing or forward by hitching. As soon as
the lever is released, the seat will lock into the new position.
The best the seat has fully locked by hitching
backwards and forwards.
Do not carry out this operation when your scooter
is moving, first stop apply the brakes and then carry out the
seat position.
CAPTAIN SEAT
The seat as fitted to your Scooter, has a fold down backrest .
The seat has four height positions similar to those found on
the standard seat. Your distribution wick position the seat
to allow you the most comfortable driving position.
6. Backrest Angle Adjustment (option): The angle of your
backrest can be adjusted to a comfortable driving position
by the operation of the lever situated on the left side
of your seat. When sitting on your seat, lean backwards
against the backrest and at the same time lift the operation
lever upwards. Lean forwards or backwards once the
locking mechanism has released, positioning the backrest
in a comfortable driving position. Releasing the lever will
lock the backrest in your chosen position.
Care should be taken during this operation as the
backrest mechanism has a strong assisting spring to aid
movement. Please Note: Damage can result the mechanism
if the backrest is not supported during this operation.
7.Backrest Height Adjustment: The upper cushion of
your backrest (See Fig 8) can be adjustment for
height, giving you more back support if you are tall,
by operating the small latch cushion up or push
down for the most comfortable position. The headrest will
also lift out for convenience.
Warning:
Caution:
Warning:
Caution:
HANDLEBAR ADJUSTMENT
Warning:
Caution:
Warning:
Caution:
HANDLEBAR ADJUSTMENT
Seat Slide of the seat:
Backrest Height Adjustment
FIG 5
FIG 6
FIG 7
FIG 8
The handlebar of your Scooter is designed to allow you to
position it in a comfortable driving position. It can be locked
into numberous positions or unlocked to move freely for
transportation.
The handlebar lock is operated by a black lever positioned
on the right hand side of the handlebar (see Fig 9, page10).
To release the handlebar from a locked position pull the black
lever upwards, the handlebar will now move freely, but under
mild tension.
9