2 setup – configuration – FRITSCH PULVERISETTE 6 classic line User Manual
Page 14
Advertising
GTM-System
page 11
2.7.2 Setup – Configuration
Set values in the configuration must be transmitted to the trans-
mitter unit for activation.
Connect the transmitter unit and the receiver using the loading
cable. Pay attention to the receiver channel which had been se-
lected in the configuration.
In the next Step you activate with Measurement / Connection
the interface.
Thereafter you select under Measurement / Setup the transmitter tool
“Setup broadcast-unit”.
By use of the button "Setup" the new configuration data will be
transmitted.
Advertising
This manual is related to the following products: