FRITSCH PULVERISETTE 5/4 classic line - Manual (Page 13)

2.5 Device safety information
n Only use original accessories and original spare parts. Failure to
observe this instruction can compromise the safety of the machine.
n Safe conduct must be strictly observed during all work.
n All currently applicable national and international accident preven-
tion guidelines must be complied with.
CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear pro-
tection should be worn to prevent hearing damage.
WARNING!
The maximum accepted concentration (MAC) levels of the
relevant safety guidelines must be observed; if necessary,
ventilation must be provided or the machine must be oper-
ated under an extractor hood.
DANGER!
Explosion hazard!
– When grinding oxidisable substances, e.g. metal or
coal, there is a risk of spontaneous combustion (dust
explosion) if the proportion of fine particles exceeds a
certain percentage. When grinding these kinds of sub-
stances, special safety measures must be taken and the
work must be supervised by a specialist.
– The device is not explosion-protected and is not suit-
able for grinding explosive materials.
n Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the device will void Fritsch's declaration
of conformity to European directives and void the guarantee.
n The PULVERISETTE 5 should only be used when it is in proper
working order, as intended and in a safety- and hazard-conscious
manner adhering to the operating manual. In particular, immediately
rectify any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
n Do not reuse damaged accessories.
Please observe!
Safety information and use
- 13 -