FRITSCH PULVERISETTE 5/4 classic line - Manual (Page 39)

6.8 Settings on the control panel
6.8.1 Setting the speed
n Switch on the main switch (10) on the back side of the device (I).
n The green POWER SUPPLY ready status indicator lights up on the
control panel.
ROTATIONAL SPEED control panel area
Press and hold the + or - button.
The speed can be selected in steps of 10 between 50 and 400 1/min.
The actual speed is displayed during operation. The nominal speed is
briefly displayed when the + or - button is pressed.
6.8.2 Setting the running time
TIMER control panel area
Setting the grinding time
1.
Press the "MILLING" button.
ð The "MILLING" button lights up
2. Press the + or - buttons to set the running time in hours (0...99)
and minutes (0...59)!
Set the pause time
1.
Press the "PAUSE" button.
ð The "PAUSE" button lights up.
2. Press the + or - buttons to set the pause time in hours (0...99) and
minutes (0...59)!
If no pause time is required, set the pause time to 0.
Using the device
- 39 -