FRITSCH PULVERISETTE 16 cast iron - Manual (Page 11)

Page 10
PULVERISETTE 16
2.3 Protective devices
•
Protective devices should be used for the intended purpose and must
not be made unserviceable or removed.
•
All protective devices must be regularly inspected for completeness and
proper function. See sections
6 Maintenance and 7 Required inspec-
tions.
2.4 Danger points
Process Action Dangers
Safety Damages and injuries resulting
from failure to follow the safety in-
structions All forms of claims for damages
are excluded
Packaging Please keep the packaging for the
duration of the warranty period A complaint and return in insuf-
ficient packaging can put your
warranty claims at risk
Transport Do not jolt, shake or throw the
“pulverisette 16” during transport Electronic and mechanical
components can be damaged
Temperature fluctua-
tions In event of temperature fluctua-
tions, protect the “pulverisette 16”
from condensation Electronic components can be
damaged
Scope of delivery In event of incomplete delivery
and/or transport damages, you
must immediately notify the ship-
per and Fritsch GmbH (within
24h). Complaints registered later than
this can no longer be accepted
under some circumstances.
Ambient temperature Falling below 5 °C
Exceeding 40 °C Electronic and mechanical
components can be damaged
Performance data changes to
an unknown extent.
Humidity Exceeding of 80 % at
temperatures up to 31 °C Electronic and mechanical
components can be damaged
Performance data changes to
an unknown extent.
Electrical connection Power network does not match
the values on the type plate Electronic components can be
damaged
Before starting up the device for
the first time, the rotation direction
must be checked; see the direc-
tional arrow on the motor. With an incorrect rotation direc-
tion, the grinding performance
is insufficient and mechanical
components may be damaged.