FRITSCH PULVERISETTE 16 cast iron - Manual (Page 14)

Page 13
PULVERISETTE 16
3.5 Fastening of the “pulverisette 16” to the universal
support
Lift the mill onto the support
with 2 people.
Important!!! Secure the de-
vice against tipping until it is
completely screwed in place,
since the mill’s centre of
gravity allows it to tip for-
ward.
Then fasten the mill to the
installation plate with the
supplied fastening materials.
Mounting holes
“pulverisette 16”
Attention!
Warning against
danger spot
Warning against
hand injury