FRITSCH PULVERISETTE 16 cast iron - Manual (Page 18)

Page 17
PULVERISETTE 16
4.3 Opening and closing the mill housing
Only open the “pulverisette 16” while it is switched off.
• Press the button 0 on the power switch A or turn to the OFF setting
(see image)
• Press the hand wheel B1 and turn to the left
• The hand wheel snaps into the final position
• Close in reverse order
0 I
Important:
Only close the door when the contact surfaces are absolutely free of
grinding material and other contaminants.
Mechanical components and the seal can be damaged.
Do not open “pulverisette 16” while the motor is running.
In the grinding of toxic or otherwise harmful substances, there is a risk
of inhalation of dusts that are harmful to health.
Do not open the “pulverisette 16” and release the motor brake at the
same time.
Risk of injury from the unbraked cross beater.