FRITSCH PULVERISETTE 16 cast iron - Manual (Page 17)

Page 16
PULVERISETTE 16
4.2 Operating elements and their function
Item Element Symbol Function
A
Main switch
with ON/OFF
button
0 I
Disconnects and connects the “pulverisette 16”
from/to the mains
I pressed = “pulverisette 16” is switched on
0 pressed = “pulverisette 16” is switched off
A1
Power switch
with knob
Disconnects and connects the “pulverisette 16”
from/to the mains
ON = “pulverisette 16” is switched on
OFF = “pulverisette 16” is switched off
B1
Door seal
hand wheel
only with
PULVERISET
TE 16 com-
fort
Opens and closes the door of the “pulverisette
16” comfort, places tension on the door seal
Pressed and rotated right = closes the door
Pressed and rotated left = opens the door
D
Filling funnel
at door
Receives the grinding material with a maximum
grain size of 20 mm; not intended for storage of a
grinding material reserve;
Reliably prevents backspray of the grinding mate-
rial.
E Filter hose w/o illustration
Prevents a back draft from the air pressure gen-
erated by the rotating cross beater, thereby ac-
celerating the material throughput.
F
Collecting
vessel 5 l
w/o illustration Receives the ground material.
G
Release level
for the motor
brake
Pushing back releases the motor brake, allowing
manual turning of the cross beater for cleaning.
H Transport bolt
Prevents damage to mechanical and electrical
components during transport.