FRITSCH LABORETTE 27 - Manual (Page 15)

4 Installation
4.1 Transport
n The device is packaged in a cardboard box. This is additionally pack-
aged in a wooden case with the accessories and any other devices,
depending on the scope of the order.
WARNING!
Improper lifting can lead to personal injury or property
damage. The machine is only to be lifted with suitable
equipment and by qualified personnel.
The guarantee excludes all claims for damage due to improper transport.
4.2 Unpacking
n It is best to open the wooden case by pulling out the metal clips with
pliers.
n Carefully open the cardboard box with a knife (do not cut too deep,
as otherwise the contents could become damaged) and remove the
packaging material.
n Check the device for possible damage in transit.
n Compare the contents of the delivery with your order.
4.3 Setting up
n Place the rotary cone sample divider on a flat, stable surface.
n Adjust the rubber feet for levelling and to compensate for uneven
surfaces.
n It does not have to be fastened to the surface.
n Ensure that the rotary cone sample divider is easily accessible.
Installation
- 15 -