Industrial Data Systems IDS 152 - Manual (Page 24)

3.3.4 CONFIGURATION: SET TIME AND DATE PRINT FORMAT.
The clock data can be printed in 6 different formats and at
3 different positions. Use the following lists to configure
the time/date print to fit your application.
FORMAT LIST
0 = Disable Time & Date
1 = Print Time & Date With Labels
2 = Print Time With Label
3 = Print Date With Label
4 = Print Time & Date
5 = Print Time
6 = Print Date
POSITION LIST
1 = Print Clock Data as Last Line
2 = Print Clock Data at Beginning of the 1st Line
3 = Print Clock Data at End of the 1st Line
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 5.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to one of the above format
numbers.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to one of the above position
numbers.
7. Press the ENTER switch. The ENTER light turns off.
SET TIME/DATE FORMAT
FLASH ON OFF (Enter Light)
SET TIME FORMAT 5 Format no. Position no.(Thumbwheel Switch)
Time 5 5 1
On Last Line
REMEMBER: Return the thumbwheel switch to the correct mode
postition after configuration
.