Industrial Data Systems IDS 152 - Manual (Page 28)

3.4.2 CONFIGURATION: SCALE UNITS
.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 7.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 2.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for undefined
1 for LB
2 for kg
3 for TON
4 for TNE
5 for GRAM
6 for OZ
7 for t
7. Press the ENTER switch. The ENTER light turns off.
CONFIGURATION: SCALE UNITS (cont.)
SET SCALE UNITS
FLASH ON OFF (Enter Light)
Set LB 7 2 1 (Thumbwheel Switch)
Set kg 7 2 2 (Thumbwheel Switch)
Set TON 7 2 3 (Thumbwheel Switch)
Set TNE 7 2 4 (Thumbwheel Switch)
Set GRAM 7 2 5 (Thumbwheel Switch)
Set OZ 7 2 6 (Thumbwheel Switch)
Set t 7 2 7 (Thumbwheel Switch)
Undefined 7 2 0 (Thumbwheel Switch)
REMEMBER: Return the thumbwheel switch to the correct mode
postition after configuration.