Industrial Data Systems IDS 152 - Manual (Page 25)

3.3.5 CONFIGURATION: TICKET NUMBER.
The ticket number is enabled when it is set. Setting the
ticket number to 00000 disables ticket numbering.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 2.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 6.
5. Press the ENTER switch. The ENTER light turns on.
6. Enter a 5 digit number by selecting numbers on the
thumbwheel and pressing the ENTER switch.
7. The ENTER light turns off.
------------------ SET TICKET NUMBER -----------------
FLASH ON ON ON ON ON OFF (Enter Light)
Ticket 2 6 X X X X X (Thumbwheel Switch)
Number (XXXXX is a 5 digit ticket number)
REMEMBER: Return the thumbwheel switch to the correct mode
postition after configuration
.