Industrial Data Systems IDS 152 - Manual (Page 9)

2.5 THE SPECIAL APPLICATION MODES.
The special modes are used for weighing applications. They are
used in those cases where the weigh-meter is not capable of
producing the required print data.
The mode options are selected by setting the thumbwheel switch
to the option number. The following is a list of the modes and
their option numbers:
0 BASIC PRINTER MODE (Slave Printer).
1 PRINT WEIGHT ONLY.
2 PRINT WEIGHTS WITH GROSS, AND TARE LABELS.
3 GROSS, TARE, NET PRINTING.
4 PRINT AND TOTAL.
5 PRINT, SUBTOTAL, AND TOTAL.
6 PRINT AND TOTAL ( AXLE WEIGH ).
7 WEIGH-IN, WEIGH-OUT.
If you use one of the special modes be sure to configure the
scale options:
Section 3.4.1 SELECT SCALE METER TYPE
Section 3.4.2 CONFIGURE SCALE UNITS.
If pulse input is being used then also configure:
Section 3.4.3 DECIMAL POSITION.
Section 3.4.4 COUNT/PULSE FACTOR.