Inovonics Radius Installer User Manual
Inovonics Software
Advertising
Table of contents
Document Outline
- Preface
- Notice
- Document Part Number
- Trademarks
- US Patent Numbers
- Technical Services Contact Information
- Document Conventions
- Warranty
- Radius Overview
- 1.1 About Radius
- 1.2 Defining the Radius System
- 1.2.1 Monitored Devices
- 1.2.2 Device Categories
- 1.2.3 Alert Devices
- 1.2.4 Alert Groups
- 1.2.5 Modes and Actions
- 1.3 Radius Server Components
- 1.3.1 Radius Server
- 1.3.2 Network Coordinator
- 1.3.3 High Power Repeater
- 1.3.4 Wireless End Devices
- 1.3.5 Dialogic® Combined Media Board
- 1.3.6 Two-Way Radio Interface
- 1.3.7 Paging Base Station and Pagers
- Radius Server Installation and Configuration
- 2.1 Radius Server Installation
- 2.1.1 Connect to the Radius Server
- 2.1.2 Configure the Radius Server with a Static IP Address
- 2.1.3 Check for Active License for your Radius System
- Network Coordinator Installation and Configuration
- 3.1 Network Coordinator Installation
- 3.1.1 Configure the Network Coordinator
- High Power Repeater Installation and Configuration
- 4.1 High Power Repeater Installation
- 4.1.1 Configure Repeaters
- End Device Installation and Configuration
- 5.1 End Device Installation
- 5.1.1 Create Category
- 5.1.2 Pendant Transmitter Installation
- 5.2 Universal Transmitter Installation
- 5.2.1 Register a Universal Transmitter
- 5.3 Specialized and Motion Detector Transmitter Installation
- 5.3.1 Register a Specialized or Motion Detector Transmitter
- Dialogic® D/41JCT-LS Combined Media Board Installation and Configuration
- 6.1 Dialogic® D/41JCT-LS Combined Media Board Installation
- 6.1.1 Configure the Dialogic Board
- 6.1.2 Set Up a Phone (Voice Call) Alert
- Two Way Radio Module Installation
- 7.1 Two-Way Radio Module Installation
- Pager Installation and Configuration
- 8.1 WaveWare Paging Base Installation
- 8.1.1 Configure the Paging Base
- 8.1.2 Configure Apollo Gold Pagers
- 8.1.3 Configure Wall Pagers
- Restart Services
- 9.1 Restart Services