KEYENCE CV-H5N - Manual (Page 133)

4
CV-H5N-M-WW-NO4-E 4-49
4
Click the [Execute] button to start the transfer.
A message will appear indicating that the data has been
loaded.
Note
• Depending on the specifications of CV-5001 Series controller, a
message saying "The BR command returned an error" may be
displayed even when data has been loaded properly. No error
has occurred.
• Regardless of the number of cameras connected, image data
from all cameras will be loaded.
• If the [Cancel] button is clicked while loading images, the
software will stop reading data, but the CV-5001 Series controller
will continue outputting.
Please wait several minutes before clicking the [Execute] button
again.
5
Click the [OK] button, then click the [Close] button in the
[Import Test Images] window.
You will return to the main window.
Note
For a program file that uses multiple cameras, if the number of
captured images differs for each camera, black screens are
measured instead of images for those cameras with fewer captured
images.
5