KEYENCE CV-H5N - Manual (Page 52)

2
CV-H5N-M-WW-NO2-E 2-28
Example 2: Creating a Log File and Displaying it with Excel
This section describes how to create a log file for output data, save that log file and then open it as an Excel
file.
Creating a Log File and Displaying it with Excel
1. Selecting a connection point
[Edit Connection Setting] menu
1
Select [New] or a [Connection name] from the
[Connections] menu. To set a new connection point, first
set the detailed settings in the [Edit Connection Setting]
menu.
Refer to "Connecting to a Selected Connection Point" (page
4-9) and "Specifying a New Connection Point" (page 4-6).
2. Obtaining output configuration data
1
Select [Acquire output setup data] from the selected
connection under the [Connections] menu to obtain the
data from the CV-5001 Series controller.
Refer to "Obtaining CV-5001 Series Controller Output
Configuration Data from a Computer" (page 3-15).
When output configuration data has been obtained, the
message on the left will appear.
1