KEYENCE CV-H5N User Manual
Page 138
4
CV-H5N-M-WW-NO4-E
4-54
2
Select [File] for [Read From].
•
File
Select this to read the program data from a folder within
the computer, and when you write the program data to
the drive folder within the computer.
•
Connected CV
Select this to read/write the program data from/to the
CV-5001 Series controller connected to the computer.
3
Select [File Location].
Select the program data folder within the computer or in an
external removal media.
Reference
Program number 005 on the memory card connected to the E drive
is selected in the example shown on the left.
4
Select [Read to].
•
Drive C of Virtual CV
Select this to load data to the virtual C drive of the
simulator.
•
Drive D of Virtual CV
Select this to load data to the virtual D drive of the
simulator.
5
Select [Program no.].
The default setting is the program number currently being
used by the simulator.