KEYENCE CV-H5N - Manual (Page 54)

CV-H5N-M-WW-NO2-E 2-30
2
4. Connecting a CV-5001 Series controller
1
Select [Connect] under the specified connection from
the [Connections] menu to connect your computer to a
CV-5001 Series controller.
Refer to "Connecting to a Selected Connection Point" (page
4-9).
Reference
This can also be done using toolbar icons. ( Refer to page 3-20.)
Note
To set image output for a CV-5001 Series controller, connect the
device while data collection is stopped.
5. Commence storage of output data
1
Select [Start collection] from the [Data Collection] menu
to begin storing output data.
Refer to "Enabling Data Collection" (page 4-28).
Reference
This can also be done using toolbar icons. ( Refer to page 3-20.)
6. Stopping storage
1
Select [End collection] from the [Data Collection] menu
to stop storing output data.
Refer to "Ending Data Collection" (page 4-28).
Reference
This can also be done using toolbar icons. ( Refer to page 3-20.)
1
1
1