KEYENCE CV-H5N - Manual (Page 22)

1
CV-H5N-M-WW-NO1-E 1-12
Obtaining a Serial Key for the Simulator
A serial key from Keyence is required to run the simulator functions.
The procedure for obtaining a serial key is as follows.
1
Start the software.
Refer to "Starting the Software" (page 3-2) for information on
starting the software.
2
Select [Start simulation] from the [Simulator] menu.
The [CV5000 simulator registry] menu appears.
Note
The screens shown are only examples.
3
Write down the displayed [User ID (4 digit number-4 digit
number-4 digit number-4 digit number)] and store it in a
safe place. This will need to be input later.
4
To obtain the Serial Key for the simulator, please contact
the Keyence representative in your area at
Global Home: <http://www.keyence.com/>.
You will need to supply the User ID that is displayed when
the simulator is launched and your contact information.