KEYENCE CV-H5N - Manual (Page 49)

2
CV-H5N-M-WW-NO2-E 2-25
■ Writing the program data from the drive folder in the computer
1
Select [Transfer programs] from the [Simulator] menu.
Note
This function is not available while collecting data.
Suspend data collection before proceeding with the simulator.
2
Click the [Write to cv] tab.
1 Information about [Write from] is displayed.
• Virtual CV
The name of the selected Virtual CV is displayed.
• Write from/Program no.
Specify the program number from which to read the data. (See steps 3 and 4.)
2 Information about [Write to] is displayed.
• Program destination
Select [File] (a program file in the drive folder in the computer). [Connected CV] is grayed out when the CV-5001
Series controller is not connected.
• File Location
Specify the program folder to write in from the drive folder in the computer.
• File type
Select the program file types to be written.
Refer to the CV-5001 Series controller “User’s Manual” for more details about a specific item.
1
3
4
5
2
6
1
2
7