Kofax INDICIUS 6.0 - Manual (Page 49)

Configuring Recognition and Correction
Getting Started Guide (Fixed-Form) 43
10
Select “Expected” and set Width to 27 and Height to 34 (the average
character size).
11 Move the green box around the image to compare its size to the characters.
12 Select “Maximum” and set Width to 52 and Height to 53 (approximately 1½
times the character width and height, or slightly larger than the size of an
upper case W for a variable width font).
Figure 5-9. Definer Character Sizes Window
13
Click OK to close the Definer Character Sizes window.
14
On the Allowed Characters panel of the Main tab, select “Upper Case Alpha”
and clear the other options.
Allowed Characters is used by Recognition to narrow down the possible
identity of characters in a field, thus increasing accuracy.
15
On the Weights panel of the Main tab, select “Machine – General” and clear
the other options (see Figure 5-10).
Weights specifies the neural network type used to recognize the text.