Kofax INDICIUS 6.0 User Manual
Page 56
Chapter 5
50
Getting Started Guide (Fixed-Form)
Figure 5-14. Blob Removal
11
Select Tools | Test Definition or press F8 to save and test the definition.
12
Test on one example image and then all example images as before.
Note how the boxes are removed from the “CreditCardNumber” field prior
to recognition and that some characters are rejected.
Note
When Hand Print is selected for weights, the character sizes will
automatically be set. If they haven’t already been defined, character sizes are
automatically set depending on the weights selected. In this case, you have
modified these default sizes to match the large handprint characters.
It may be necessary to select Image | Zoom Out or click the
button to see
the entire “CreditCardNumber” field. Select Image | Zoom In or click the
button to return to the original image display.
X
To create a multi-line field
1
Select the “Formid 1” tab and scroll until the address “4210 MAIN
STREET….” is visible.
2
Click the
(Multi-line field) button on the toolbar.
3
Draw the field around the address on the image.
4
Configure the field by setting the properties shown in Table 5-8.