AERCO BMS II BOILER - Manual (Page 91)

APPENDIX G
G-7
APPENDIX G
(cont.)
__________________________
Table G-1. BMS II COMMANDS – (Continued)
No. COMMAND ENTRY RANGE
FACTORY DEFAULT
129 Modbus Pass-Thru 0 = Disabled
1 = Enabled 0 = Disabled
130 Header Temp Deadband 01 to 15°F 05°F
131 Outside Temp Sensor Offset -10.0°F to 10.0°F 0.0°F
132 Ramp Up %/Min 000 to 300 20
133 Ramp Down %/Min 000 to 300 200
134 Fault Alarm Boilers No Blr Faults
All Blr faults No Blr Faults
135 4-20 mA Offset -1.00 to 1.00 mA 0.0 mA
136 Return Sensor Offset -10.0 to 10.0°F 0.0°F
137 Load Start Pct 000 to 100 1
138 Load Stop Pct 000 to 100 0
150 I/O Status 00 to 255 Bit 0 = AUX Relay
Bit 1 = Fault Relay
Bit 2 = Sys Start Relay
Bit 3 = Empty
Bit 4 = Setback
Bit 5 = Interlock 2
Bit 6 = Interlock 1
Bit 7 = Empty
151
&
Up
(Reserved For Future Expansion) Undefined